Search
Menu Close

Photosynthetic Light (PAR) Smart Sensor - S-LIA-M003

Manufacturer:
The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm.
Part Number: S-LIA-M003
Back to Previous Page
Product Files
$383.00 ex GST
i h

The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm. Enclosed in a anodized aluminum housing with acrylic diffuser and o-ring seal, this model has a 3m cable; a light sensor bracket and light sensor level are recommended.

Environment:
The S-LIA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LIA-M003 Sensor supports the following measurements :

Light Intensity
Measurement parameters: average over logging interval, user-defined sampling interval from 1 second
Measurement range: 0 to 2500 umol/m2/sec, wavelengths of 400 to 700 nm
Operating Temperature Range: -40° to 75°C (-40° to 167°F)
Accuracy: ±5 umol/m2/sec or ± 5%, whichever is greater in sunlight; additional temperature-induced error ±0.75 umol/m2/sec/degree C from 25°C. Cosine corrected 0 - 80 degrees, 360 degree rotation.
Resolution: 2.5 umol/m2/sec
Drift: <±2% per year
Response time:
Housing: anodized aluminum housing with acrylic diffuser and o-ring seal
Dimensions: 4.1 cm height x 3.2.4 cm diameter (1 5/8" height x 1 1/4" diameter)
Approximate Weight: 120 g (4 oz)
Cable Length: 3 meter (10')

Note: Light sensor bracket and light sensor level recommended

The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm. Enclosed in a anodized aluminum housing with acrylic diffuser and o-ring seal, this model has a 3m cable; a light sensor bracket and light sensor level are recommended.

Environment:
The S-LIA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LIA-M003 Sensor supports the following measurements :

Light Intensity
Customers who bought this item also bought

12-bit Temperature/RH Smart Sensor - S-THB - 2 and 8 Meter

The 12-bit Temperature/RH Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
$329.00 ex GST

NDVI Light Sensor Bracket - M-NDVI

This bracket is used to mount two PAR sensors (Part# S-LIA-M003) and two solar radiation sensors (Part# S-LIB-M003) on the Light Sensor Bracket (Part# M-LBB) for making the measurements needed to calculate the Normalized Difference Vegetation Index (NDVI).
$47.00 ex GST

Solar Radiation Shield - Small - RS3-B

The RS3-B Solar Radiation Shield protects external sensors from the effects of sunlight and rain to ensure high accuracy measurements.
$151.00 ex GST