12-bit Temperature/RH Smart Sensor - S-THC - 2 and 8 Metre
 
Search
Menu Close

12-bit Temperature/RH Smart Sensors

The Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept smart sensors. All sensor parameters are stored inside the smart sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
Part Number: S-THC-M002 , S-THC-M008
Manufacturer:
0Types Available
Back to Previous Page

The Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept smart sensors. All sensor parameters are stored inside the smart sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.

Models Available: Select when ordering

S-THC-M002 (2 Metre)
S-THC-M008 (8 Metre) 

Features

  • Smart sensor
  • Works with all loggers that accept smart sensor inputs
  • Automatically communicates configuration data to the logger

In what environment does this sensor operate?
This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?
The S-THC sensors supports the following measurements: Dew Point, Relative Humidity and Temperature

Measurement RangeTemp: -40°C to 75°C (-40°F to 167°F)
RH: 0-100%* RH at -40° to 75°C (-40° to 167°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%

Accuracy
Temp: ±0.25°C from -40° to 0°C (±0.45°F from -40° to 32°F); ±0.20°C from 0° to 70°C (±0.36°F from 32° to 158°F); ±0.25°C from 70° to 75°C (±0.45°F from 158° to 167°F)
RH: ±2.5% from 10% to 90% RH (typical), to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% and above 90% ±5% typical

Resolution
Temp: 0.02°C
RH: 0.01% RH

Bits Per Sample
Temp: 16
RH: 16

Drift
Temp: < 0.01°C (0.18°F) per year
RH: < 1% per year typical

Response Time (typical, to 90% of change)Temp: Without solar radiation shield: 3 minutes, 45 seconds in air moving 1 m/s; With RS3-B solar radiation shield: 6 minutes, 30 seconds in air moving 1 m/s
RH: Without solar radiation shield: 15 seconds in air moving 1 m/s; With RS3-B solar radiation shield: 30 seconds in air moving 1 m/s

Operating temperature range: -40°C to 75°C (-40°F to 167°F)

Environmental rating: Weatherproof: 0 to 100% RH intermittent condensing environments. For best results, protect the Temp/RH sensor from sunlight and direct splashing by mounting it inside a protective enclosure, such as a solar radiation shield.

Housing: PVC cable jacket with ASA styrene polymer RH sensor cap; modified hydrophobic polyethersulfone membrane

Sensor dimensions: 45.97 x 11.43 x 10.16 mm (1.81 x 0.45 x 0.40 inches)

Weight: 110 g (3.88 oz)

Number of data channels**: 2

Measurement averaging option: No

Cable lengths available: 2.5 m (8.2 ft)

Length of Smart Sensor network cable: 0.5 m (1.6 ft)

This product meets CE specification EN61326 criterion C for ESD, criterion C for Radiated Immunity, criterion C for Fast Transient, criterion B for Conducted Immunity, criterion A for Power Frequency Magnetic Fields, and Radiated Emissions Group 1, Class B. To minimize measurement errors due to ambient RF, use the shortest possible probe cable length and keep the probe cable as far as possible from other cables.

* Maximum 100% RH readings are only logged with RX3000 stations. The maximum readings for this sensor with U30 and H21 stations are approximately 99.99%.
** A single HOBO station can accommodate 15 data channels and up to 100 m (328 ft) of smart sensor cable (the digital communications portion of the sensor cables).

The Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept smart sensors. All sensor parameters are stored inside the smart sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.

Models Available: Select when ordering

S-THC-M002 (2 Metre)
S-THC-M008 (8 Metre) 

Features

  • Smart sensor
  • Works with all loggers that accept smart sensor inputs
  • Automatically communicates configuration data to the logger

In what environment does this sensor operate?
This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?
The S-THC sensors supports the following measurements: Dew Point, Relative Humidity and Temperature

$358.00 ex GST
i h
$369.00 ex GST
i h