Search
Menu Close

Solar Radiation Shield - Small - RS3-B

Manufacturer:
The RS3-B Solar Radiation Shield protects external sensors from the effects of sunlight and rain to ensure high accuracy measurements.
Part Number: RS3-B
Back to Previous Page
Product Files
$162.00 ex GST
i h

The RS3-B Solar Radiation Shield protects external sensors from the effects of sunlight and rain to ensure high accuracy measurements. Designed to allow maximum air flow around the sensor, the RS3-B shield offers 2.5x faster response time to changing conditions.

The RS3 Solar Radiation Shield works with most of Onset’s external temperature and Temp/RH sensors, including those for our award winning HOBO Weather Station products.

For customers interested in deploying a radiation shield with Onset logger such as a HOBO Pendant or U-Series logger, Onset also offers two other models of solar radiation shields; the RS1 and the pre-assembled M-RSA

Time response: 2.5 times faster than the RS1
Wind resistance: Tested in sustained winds up to 129 kph (80 mph), Tested in gusts up to 161 kph (100 mph)
Materials
Shield: ASA styrene (UV-stable)
Bracket: Glass-filled nylon (UV-stable)
Mounting hardware: Stainless steel and brass
Temperature: -40° to 75°C (-40° to 167°F)
Weight: 113 g (4 oz)
Height: 89 mm (3.5 inches); 159 mm (6.25 inches) with bracket
Diameter: 102 mm (4 inches); bracket protrudes an additional 51 mm (2 inches) from shield
Mounting: Up to 51 mm (2 inches) mast diameter with hose clamp; unlimited with screws
Compatible sensors: Onset part numbers S-THB-M00X, S-TMA-M0XX, S-TMB-M0XX, TMCx-HB, TMCx-HD, and external sensors from U23-00X; NOT compatible with S-THA

The RS3-B Solar Radiation Shield protects external sensors from the effects of sunlight and rain to ensure high accuracy measurements. Designed to allow maximum air flow around the sensor, the RS3-B shield offers 2.5x faster response time to changing conditions.

The RS3 Solar Radiation Shield works with most of Onset’s external temperature and Temp/RH sensors, including those for our award winning HOBO Weather Station products.

For customers interested in deploying a radiation shield with Onset logger such as a HOBO Pendant or U-Series logger, Onset also offers two other models of solar radiation shields; the RS1 and the pre-assembled M-RSA

Customers who bought this item also bought

12-bit Temperature/RH Smart Sensor - S-THB - 2 and 8 Meter

The 12-bit Temperature/RH Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
$352.00 ex GST

Photosynthetic Light (PAR) Smart Sensor - S-LIA-M003

The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm.
$410.00 ex GST

Rainfall Smart Sensor 0.2mm (2m cable) - S-RGB-M002

This Rain Gauge Smart Sensor measures rainfall with intensity up to 12.7 cm per hour with a resolution of 20 mm, and 1% accuracy for rainfall rates up to 0.2 mm/hour. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable.
$1,017.00 ex GST