Search
Menu Close

RX3000 Water Level Sensor Module - RXMOD-W1

Manufacturer:
​The RX3000 Water Level Sensor Module offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station.
Part Number: RXMOD-W1, CABLE-RWLMOD
*
Back to Previous Page
$258.00 ex GST
i h

Water Level Sensor Module:

​The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station.  It is configured through HOBOlink, Onset’s cloud-based software. For water level applications, a HOBO RX3000 station, Water Level Sensor Cable, and Water Level Sensor are required.

Highlighted Features

  • Integrated barometric pressure sensor
  • Plug-and-play remote water level and flow monitoring

In what environment does this accessory operate?

This accessory operates in outdoor and underwater environments.

What measurements does this accessory support?

The RXMOD-W1 accessory supports the following measurements: Barometric Pressure, Differential Pressure, Water Flow, Water Level and Water Temperature

Water Level Sensor Cable:

The water level sensor cable provides the connection between the HOBO RX3000 Remote Monitoring Station and the water level sensor. A HOBO RX3000 station, a water level sensor module (RXMOD-W1), and a water level sensor (MX2001-0x-S or MX2001-0x-Ti-S) are required for use with this cable.

Cables can be ordered in lengths from 1 meter to 400 meters for deployment in a wide range of applications. The 5, 10, and 15 metre cable lengths are standard. Custom cable lengths require a lead time of three to four weeks.

PLEASE NOTE: Custom cables are ineligible for return.

Highlighted Features

  • Interchangeable Kevlar-reinforced cable can be used to suspend sensor
  • Provides sensor communication and power
  • Two O-rings in the water level sensor connector ensure a long-term waterproof seal
  • Cables are easy to attach or change

In what environment does this cable operate?

This cable operates in outdoor and underwater environments.

What measurements does this cable support?

The CABLE-RWLMOD cable supports the following measurement: Water Level

Pressure (Absolute) and Water Level Measurements MX2001-01-S and MX2001-01-Ti-S
Operation Range 0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 207 kPa (10 to 30 psia), 0 to 40C (32 to 104F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy* Typical error: 0.05% FS, 0.5 cm (0.015 ft) water
Maximum error: 0.1% FS, 1.0 cm (0.03 ft) water
Raw Pressure Accuracy** 0.3% FS, 0.62 kPa (0.09 psi) maximum error
Resolution <0.02 kpa="" 0="" 003="" psi="" 21="" cm="" 007="" ft="" water="" td="">
Pressure Response Time (90%)*** <1 second="" at="" a="" stable="" temperature="" td="">
Pressure (Absolute) and Water Level Measurements MX2001-02-S
Operation Range 0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at
3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 400 kPa (10 to 58 psia), 0 to 40C (32 to 104F)
Burst Pressure 500 kPa (72.5 psia) or 40.8 m (134 ft) depth
Water Level Accuracy* Typical error: 0.05% FS, 1.5 cm (0.05 ft) water
Maximum error: 0.1% FS, 3.0 cm (0.1 ft) water
Raw Pressure Accuracy** 0.3% FS, 1.20 kPa (0.17 psi) maximum error
Resolution <0.04 kpa="" 0="" 006="" psi="" 41="" cm="" 013="" ft="" water="" td="">
Pressure Response Time (90%)*** <1 second="" at="" a="" stable="" temperature="" td="">
Pressure (Absolute) and Water Level Measurements MX2001-03-S
Operation Range 0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 850 kPa (10 to 123.3 psia), 0 to 40C (32 to 104F)
Burst Pressure 1,200 kPa (174 psia) or 112 m (368 ft) depth
Water Level Accuracy* Typical error: 0.05% FS, 3.8 cm (0.125 ft) water
Maximum error: 0.1% FS, 7.6 cm (0.25 ft) water
Raw Pressure Accuracy** 0.3% FS, 2.55 kPa (0.37 psi) maximum error
Resolution <0.085 kpa="" 0="" 012="" psi="" 87="" cm="" 028="" ft="" water="" td="">
Pressure Response Time (90%)*** <1 second="" at="" a="" stable="" temperature="" td="">
Pressure (Absolute) and Water Level Measurements MX2001-04-S and MX2001-04-Ti-S
Operation Range 0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 145 kPa (10 to 21 psia), 0 to 40C (32 to 104F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy* Typical error: 0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: 0.15% FS, 0.6 cm (0.02 ft) water
Raw Pressure Accuracy** 0.3% FS, 0.43 kPa (0.063 psi) maximum error
Resolution <0.014 kpa="" 0="" 002="" psi="" 14="" cm="" 005="" ft="" water="" td="">
Pressure Response Time (90%)*** <1 second="" at="" a="" stable="" temperature="" td="">
Barometric Pressure
Operation Range 66 to 107 kPa (9.57 to 15.52 psia)
Temperature Calibrated Range -20 to 50°C (-4 to 122°C)
Accuracy ±0.2 kPa (±0.029 psi) over full temperature range at fixed pressure; maximum error ±0.5% FS
Water Level Accuracy* Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
Resolution <0.01 kpa="" 0="" 0015="" psi="" td="">
Response Time <1 second="" at="" a="" stable="" temperature="" td="">
Stability (Drift) <0.01 kpa="" 0="" 0015="" psi="" per="" year="" td="">
Water Level Sensor and Cable
Dimensions Sensor (MX2001-0x-S and MX2001-0x-Ti-S): 2.54 cm (1.0 inches) diameter, 9.91 cm (3.9 inches) length
Cable (CABLE-RWL-xxx): 0.47 cm ±0.03 (0.185 inches ±0.01) diameter, 0.2 to 400 m (0.65 to 1,312 ft) length
Note: The length of the water level logger cable can vary -0% to +3% +10 cm (3.9 inches) from the length ordered.
Weight Stainless sensor (MX2001-0x-S): Approximately 106 g (3.74 oz) in air; approximately 53.9 g (1.9 oz) in fresh water
Titanium sensor (MX2001-0x-Ti-S): Approximately 80 g (2.83 oz) in air; approximately 37 g (1.3 oz) in fresh water
Cable (CABLE-RWL-XXX): 39 g (1.38 oz) per 1 meter (3.28 ft)
Materials Stainless sensor (MX2001-0x-S): Acetal housing, Viton and Buna-N O-rings, ceramic sensor in stainless steel end cap
Titanium sensor (MX2001-0x-Ti-S): Acetal housing, Viton and Buna-N O-rings, ceramic sensor in Titanium end cap
Cable (CABLE-RWL-XXX): Polycarbonate end cap, PVC end cap, polycarbonate collar nut, Viton O-rings, polyurethane jacket

 

* Water Level Accuracy: With accurate reference water level measurement, known water density, and a stable temperature environment. System Water Level Accuracy equals the sum of the Barometric Water Level Accuracy plus the selected sensor Water Level Accuracy.

** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors.

*** Changes in Temperature: Allow 20 minutes in water to achieve full temperature compensation of the pressure sensor. There can be up to 0.5% of additional error due to rapid temperature changes.

Measurement accuracy also depends on temperature response time.

Water Level Sensor Module:

​The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station.  It is configured through HOBOlink, Onset’s cloud-based software. For water level applications, a HOBO RX3000 station, Water Level Sensor Cable, and Water Level Sensor are required.

Highlighted Features

  • Integrated barometric pressure sensor
  • Plug-and-play remote water level and flow monitoring

In what environment does this accessory operate?

This accessory operates in outdoor and underwater environments.

What measurements does this accessory support?

The RXMOD-W1 accessory supports the following measurements: Barometric Pressure, Differential Pressure, Water Flow, Water Level and Water Temperature

Water Level Sensor Cable:

The water level sensor cable provides the connection between the HOBO RX3000 Remote Monitoring Station and the water level sensor. A HOBO RX3000 station, a water level sensor module (RXMOD-W1), and a water level sensor (MX2001-0x-S or MX2001-0x-Ti-S) are required for use with this cable.

Cables can be ordered in lengths from 1 meter to 400 meters for deployment in a wide range of applications. The 5, 10, and 15 metre cable lengths are standard. Custom cable lengths require a lead time of three to four weeks.

PLEASE NOTE: Custom cables are ineligible for return.

Highlighted Features

  • Interchangeable Kevlar-reinforced cable can be used to suspend sensor
  • Provides sensor communication and power
  • Two O-rings in the water level sensor connector ensure a long-term waterproof seal
  • Cables are easy to attach or change

In what environment does this cable operate?

This cable operates in outdoor and underwater environments.

What measurements does this cable support?

The CABLE-RWLMOD cable supports the following measurement: Water Level