Onset Hobo Data Loggers Authorised Distributor

HOBO MX1102 Carbon Dioxide (CO2) Data Logger - MX1102

Onset’s HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. Download to your phone or PC.
Part Number: MX1102
$1,036.00 ex GST
[$1,139.60 inc GST]

Affordable and Convenient

No internet access, cables, or PC required!

Onset’s HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. It measures CO2 from 0 – 5,000 parts per million (ppm) – and our free HOBOmobile app* allows you to access data right from your mobile phone or tablet within a 100-foot range. The MX1102 also features a USB port so it can be used with a computer running HOBOware graphing and analysis software.

  • Runs for six months on four AA batteries
  • LCD displays current readings and logger status
  • Works with Onset’s free HOBOmobile™ app
  • Audible alarms notify you of problems
  • Self-calibrating CO2 sensor ensures optimal accuracy at lower maintenance costs

*iOS 8.0–8.3 required; Android app support estimated early Fall 2015.

 


 

 

CO2 monitoring where it counts

Tracking CO2 is a critical aspect of measuring indoor air quality and ensuring a healthy environment. Whether you need to monitor an office space, school, hospital or greenhouse, the HOBO MX1102 makes the process fast, easy and cost-effective.

 

 


 

 


Important:

The data logger requires either the HOBOmobile App and a compatible mobile device or Onset's HOBOware software. The system requirements for the HOBOmobile app can be found at the bottom of our HOBOmobile software page. 

Environment:
The MX1102 Data Logger is for use in Indoorenvironments

Measurements:
The MX1102 Data Logger supports the following measurements:

Temperature • Relative Humidity • Carbon Dioxide 

Affordable and Convenient

No internet access, cables, or PC required!

Onset’s HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. It measures CO2 from 0 – 5,000 parts per million (ppm) – and our free HOBOmobile app* allows you to access data right from your mobile phone or tablet within a 100-foot range. The MX1102 also features a USB port so it can be used with a computer running HOBOware graphing and analysis software.

  • Runs for six months on four AA batteries
  • LCD displays current readings and logger status
  • Works with Onset’s free HOBOmobile™ app
  • Audible alarms notify you of problems
  • Self-calibrating CO2 sensor ensures optimal accuracy at lower maintenance costs

*iOS 8.0–8.3 required; Android app support estimated early Fall 2015.

 


 

 

CO2 monitoring where it counts

Tracking CO2 is a critical aspect of measuring indoor air quality and ensuring a healthy environment. Whether you need to monitor an office space, school, hospital or greenhouse, the HOBO MX1102 makes the process fast, easy and cost-effective.

 

 


 

 


Important:

The data logger requires either the HOBOmobile App and a compatible mobile device or Onset's HOBOware software. The system requirements for the HOBOmobile app can be found at the bottom of our HOBOmobile software page. 

Environment:
The MX1102 Data Logger is for use in Indoorenvironments

Measurements:
The MX1102 Data Logger supports the following measurements:

Temperature • Relative Humidity • Carbon Dioxide 

To see the full specifications for this product, please see our product manual found above.

Temperature Sensor

Range

0° to 50°C (32° to 122°F)

Accuracy

±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)

Resolution

0.024°C at 25°C (0.04°F at 77°F)

Drift

<0.1°C (0.18°F) per year

 

RH Sensor

Range

1% to 70% RH when CO2 sensor is enabled (non-condensing)

1% to 90% RH when CO2 sensor is disabled (non-condensing)

Accuracy

±2% from 20% to 80% typical at 25°C (77°F)

Hysteresis

±2% RH

Resolution

0.01% at 25°C (77°F)

Drift

<1% per year typical

 

CO2 Sensor

Range

0 to 5,000 ppm

Accuracy

±50 ppm ±5% of reading at 25°C (77°F), less than 70% RH and 1,013 mbar

Warm-up Time

15 seconds

Calibration

Auto or manual to 400 ppm

Non-linearity

<1% of FS

Pressure Dependence

0.13% of reading per mm Hg (corrected via user input for elevation/altitude)

Operating Pressure Range

950 to 1,050 mbar (use Altitude Compensation for outside of this range)

Compensated Pressure Range

-305 to 5,486 m (-1,000 to 18,000 ft)

Sensing Method

Non-dispersive infrared (NDIR) absorption

 

Response Time

Temperature

12 minutes to 90% in airflow of 1 m/s (2.2 mph)

RH

1 minute to 90% in airflow of 1 m/s (2.2 mph)

CO2

1 minute to 90% in airflow of 1 m/s (2.2 mph)

 

Logger

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)

Logger Operating Range

0° to 50°C (32° to 122°F); 0 to 95% RH (non-condensing)

Logging Rate

1 second to 18 hours

Logging Modes

Fixed interval (normal, statistics) or burst

Memory Modes

Wrap when full or stop when full

Start Modes

Immediate, push button, date & time, or next interval

Stop Modes

When memory full, push button, date & time, or after a set logging period

Time Accuracy

± 1 minute per month at 25°C (77°F)

Power Source

4 AA 1.5 Volt batteries (user replaceable) or USB power source (5 V DC, 2 Watts) 

Battery Life

6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and sampling intervals faster than 5 minutes while logging CO2. Entering burst logging mode will impact battery life. With HOBOmobile use, battery life can be reduced by remaining connected, excessive readouts, checking of Full Status Details, audible alarms, and paging. Visual/audible alarms and other events can have a marginal impact on battery life.

Memory

128 KB (84,650 measurements, maximum)

Download Type

USB 2.0 interface or via Bluetooth Smart

Full Memory Download Time

20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger

LCD

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

Size

7.62 x 12.95 x 4.78 cm (3.0 x 5.1 x 1.88 inches)

Weight

267.4 g (9.43 oz)

Environmental Rating

IP50

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Onset HOBO CO2 Logger MX1102

HOBOmobile App for HOBO MX Data Loggers

Click Here

HOBOware Free Download

Click Here

                    Features

Onset’s HOBOmobile app, a free download from the iTunes or Google Play app store, makes it a snap to configure MX Series data loggers and manage the collected data. Right from a mobile phone or tablet, users can view data in graphs, check the operational status of loggers, share data files and graph images for analysis in Excel, Numbers, and other applications, and store data in the cloud. HOBOmobile also makes it fast and easy to set up audible alarm notifications so users are immediately notified of problems.

  • Communicate to the HOBO MX data loggers using Bluetooth Low Energy (BLE) technology
  • Internet connection not required to use HOBOmobile
  • Set data loggers name, password, logging rate, alarm threshold, start & stop time
  • HOBOmobile can automatically upload data to Onset’s HOBOlink service for storing and merging data files (iOS only).
  • Configure and clear audible alarms
  • Page the data logger
  • Download and view data
  • Export and share data as CSV, TXT, XLSX, or HOBO files

For more How to Video's, Latest User Manuals and Documentation, click here

   IOS     Android

App Information

iOS Readme

Android Readme

 

Online store by DBG Technologies, powered by LiveCube