Onset Hobo Data Loggers Authorised Distributor

Telaire 7001 CO2 Sensor - TEL-7001

The Telaire 7001 Co2 Monitor measures and displays CO2 and temperature data simultaneously, and records the data on a HOBO data logger.
Part Number: TEL-7001
$1,214.00 ex GST
[$1,335.40 inc GST]
Product Files

The Telaire 7001 Co2 Monitor measures and displays CO2 and temperature data simultaneously, or C02 only with a U12 logger. Operating on 6 VDC from external AC/DC Adaptor (included) or four AA batteries (not included, 70+ hours operation typical), this sensor u patented Absorption Infrared® technology for CO2 measurement to a resolution of ±1 ppm.

Features:

  • Monitors C02 (and temperature) when connected to the H22 logger, C02 (only) when connected to U12 or ZW external port loggers
  • 0 to 4,000 ppm measurement range (± 1 ppm sensitivity)
  • AC power adapter included
  • Measures & Displays: CO2 and Temperature simultaneously
  • Outputs: CO2 data; see Requirements
  • CO2 accuracy (sensor only): ±50 parts per million (ppm) or ±5% of reading, whichever is greater CO2 resolution: ±1 ppm
  • Response time: <60 seconds to 90% of step change


Power Sources:

  1. 6 VDC from external AC/DC Adaptor (included)
  2. four AA batteries (not included), 70+ hours operation typical


Mechanism: Uses patented Absorption Infrared® technology for CO2 measurement

Requirements

For U12 & H8 Loggers: CO2Sensor to Logger Cable (Part # CABLE-CO2)
For HOBO Energy Logger CO2 Sensor to Logger Cable (Part # CABLE-2070). See HOBO Energy Logger Pro Specifications

The Telaire 7001 Co2 Monitor measures and displays CO2 and temperature data simultaneously, or C02 only with a U12 logger. Operating on 6 VDC from external AC/DC Adaptor (included) or four AA batteries (not included, 70+ hours operation typical), this sensor u patented Absorption Infrared® technology for CO2 measurement to a resolution of ±1 ppm.

Features:

  • Monitors C02 (and temperature) when connected to the H22 logger, C02 (only) when connected to U12 or ZW external port loggers
  • 0 to 4,000 ppm measurement range (± 1 ppm sensitivity)
  • AC power adapter included
  • Measures & Displays: CO2 and Temperature simultaneously
  • Outputs: CO2 data; see Requirements
  • CO2 accuracy (sensor only): ±50 parts per million (ppm) or ±5% of reading, whichever is greater CO2 resolution: ±1 ppm
  • Response time: <60 seconds to 90% of step change


Power Sources:

  1. 6 VDC from external AC/DC Adaptor (included)
  2. four AA batteries (not included), 70+ hours operation typical


Mechanism: Uses patented Absorption Infrared® technology for CO2 measurement

Requirements

For U12 & H8 Loggers: CO2Sensor to Logger Cable (Part # CABLE-CO2)
For HOBO Energy Logger CO2 Sensor to Logger Cable (Part # CABLE-2070). See HOBO Energy Logger Pro Specifications

Measurement Range: 
0 to 2500 ppm when using the CABLE-CO2 and a U12 or ZW
0 to 4000 ppm when using the CABLE-2070 and a H22 or U30

Telaire 7001 Operating Range:
32°F to 122°F (0°C to 50°C), 0 to 95% RH, non-condensing

Display Resolution: ±1 ppm 

Accuracy: ±50 ppm or 5% of reading, whichever is greater 

Repeatability: ±20 ppm 

Temperature Dependence: ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced at 25°C. 

Pressure Dependence: 0.13% of reading per mmHg (corrected via user input for elevation) 

Response Time: <60 seconds for 90% of step change 

Warm-Up Time: <60 seconds at 72°F (22°C) 

Calibration Interval: 12 months Full factory calibration available by contacting GE Measurement & Control Solutions.
http://www.gesensinginspection.com/en/services-and-support.html

Battery Type: Four AA batteries (not included) 

Battery Operation: 80 hours (alkaline) 

External Power Supply Specifications: 
AC/DC adapter (included) 
Output: 6 VDC, 500mA output. 
Power Connector: Round barrel with 2.5mm ID , 5.5mm OD, 12mm long, center positive (+6 VDC), outer shell ground.

Online store by DBG Technologies, powered by LiveCube