-
OVERVIEW
Accurately track energy consumption, mechanical operations, and more
Records state changes, electronic pulses, and mechanical or electrical contact closures from external sensing devices. Ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow.
The HOBO State/Pulse/Event/Runtime data logger records state changes, electronic pulses and mechanical or electrical contact closures from external sensing devices. Using HOBOware®, you can easily configure the internal magnetic reed switch or the external sensor to monitor and record data in a wide variety of applications, such as energy consumption, mechanical equipment operation, and water and gas flow. This compact data logger also has a built-in LCD screen to monitor logging status, battery use, and memory consumption. The UX90-001 has 128 KB of memory.
Please note: Item number UX90-001M has been discontinued
Features
- One logger with four recording modes
- Internal reed switch can be used to determine when a door or window is open or closed
- Compatible with a wide range of external sensors
- Ships with 2.5 mm input cable
- Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis
Important Information
Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro CD or USB software purchase). See related items below.
-
SPECIFICATIONS
Internal Sensor
Maximum State, Event,
Runtime Frequency1 Hz Preferred Switch State No magnet present (normally open) External Input
External Contact Input Electronic solid state switch closure or logic driven voltage output Range 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered) Maximum Pulse Frequency 50 Hz Maximum State, Event,
Runtime Frequency1 Hz Pulse, Event Lockout Time 0 to 1 second in 100 ms steps Solid State Switch Closure Input Low: < 10 KΩ; Input High: > 500 KΩ Internal Weak Pull-Up 100 KΩ Input Impedance Solid state switch closure: 100 KΩ pull up Logger
Resolution Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event Logging Rate 1 second to 18 hours, 12 minutes, 15 seconds Memory Modes Wrap when full or stop when full Start Modes Immediate, push button, date & time, or next interval Stop Modes When memory full, push button, or date & time Time Accuracy ±1 minute per month at 25°C (77°F) (see Plot A in User Manual) Power Source One 3V CR2032 lithium battery and USB cable Battery Life 1 year, typical with logging intervals greater than 1 minute and normally open contacts Memory 128 KB (84,650 measurements, maximum) Download Type USB 2.0 interface Full Memory Download Time 10 seconds for 128 KB; 30 seconds for 512 KB Logger Operating Range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specificationLCD LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this rangeSize 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.) Weight 23 g (0.81 oz) Environmental Rating IP50 CE The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). -
SOFTWARE
HOBOware Software
HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.
Learn more about HOBOware and HOBOware-Pro Features >>
HOBO UX90 State Logger
$298.00 ex GST
The HOBO State/Pulse/Event/Runtime data logger records state changes, electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow.
