Search
Menu Close

Leaf Wetness Smart Sensor Sensor - S-LWA-M003

Manufacturer:
The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating.
Part Number: S-LWA-M003
Back to Previous Page
$230.00 ex GST
i h

The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating. It uses a capacitive grid that is less sensitive to surface residues than resistive grid-based sensors, and comes preconditioned for consistent measurements between sensors and for long-term stability. Along with a 3-meter cable, a mounting bracket is included so the sensor can be easily positioned to mimic the wet-dry characteristics of the plants being studied.

Environment:
The S-LWA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LWA-M003 Sensor supports the following measurements :

Leaf Wetness
Measurement range: 0 (dry) to 100% (wet)
Operating Range: -40°C to 70°C, (-40°F to 158°F)
Repeatablility: ± 5%
Resolution: 0.59%
Stability: < ± 5% per year
Interchangeability between sensors (over the range 10-90%): ± 10%
Measurement Averaging Option: No
Housing: No coating required
Sensor Type: Capacitive Grid
Dimensions:
Sensor plate: 4.7 cm x 5.1 cm (1.8” x 2.0”)
Tube: 12.2 cm length x 1.8 cm diameter (4.8” x 0.7”)
Cable length: 3m (9.8’)
Approximate Weight: 127 g (4.5 oz) for sensor, and 290 g (10.2 oz) with mounting bracket
Mounting Bracket: 20 cm long (8”);Sensor can be positioned at any angle between 0 and 90 degrees (vertical)
Number of Data Channels: 1

For mounting on Onset tripods or masts 3.2 cm to 4.1 cm (1 1/4” to 1 5/8”), Cross Arms (Part # M-CAA or M-CAB), or flat surfaces. U-bolt and tie-wraps included.

The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating. It uses a capacitive grid that is less sensitive to surface residues than resistive grid-based sensors, and comes preconditioned for consistent measurements between sensors and for long-term stability. Along with a 3-meter cable, a mounting bracket is included so the sensor can be easily positioned to mimic the wet-dry characteristics of the plants being studied.

Environment:
The S-LWA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LWA-M003 Sensor supports the following measurements :

Leaf Wetness
Customers who bought this item also bought

HOBO H21-USB - Micro Station Data Logger

HOBO USB Micro Station is a weatherproof data logger for multi-channel monitoring of microclimates and accepts up to five plug-and-play Smart Sensors
$383.00 ex GST

12-bit Temperature/RH Smart Sensor - S-THB - 2 and 8 Meter

The 12-bit Temperature/RH Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
$329.00 ex GST

Rainfall Smart Sensor 0.2mm (2m cable) - S-RGB-M002

This Rain Gauge Smart Sensor measures rainfall with intensity up to 12.7 cm per hour with a resolution of 20 mm, and 1% accuracy for rainfall rates up to 0.2 mm/hour. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable.
$952.00 ex GST