Search
Menu Close

FlexSmart TRMS Module (2 channels) w/modular plug - S-FS-TRMSA-D

Manufacturer:
The 12-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals.
Part Number: S-FS-TRMSA-D
Back to Previous Page
$199.00 ex GST
i h

The 12-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals.

Used with all HOBO loggers with Smart Sensor Inputs

NOTE: The S‐FS‐TRMSA‐D should be located approximately 1 meter (3 ft) from the Logger in order to avoid interference from the radio. Use Smart Sensor extension cable Onset part # S‐EXT‐M002.

2 input channels of AC Current and/or Voltage Measures True RMS for accurate readings of sinusoidal and non-sinusoidal waveforms

Environment:
The S-FS-TRMSA-D Sensor is for use in Indoor environments

Measurements:
The S-FS-TRMSA-D Sensor supports the following measurements:

AC Current, AC Voltage
Input Channels: 2
Range: 5mV to 512mV input; compatible with 333mV FS output sensors
Maximum input: ±1V
Minimum input: 5mV
Accuracy: ±0.3% of reading ±0.5% FSR*
Resolution: 12-bit
Field wiring: 2-wire via screw terminals
Dimensions: 3.5cm x 5.7cm x 1.9cm (1.38 in. x 2.25 in. x 0.75 in.)

Cable Length: 17.8 cm (7 in.)

Weight: 21.2g (0.75oz)

* Crest factor may cause additional error

The 12-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals.

Used with all HOBO loggers with Smart Sensor Inputs

NOTE: The S‐FS‐TRMSA‐D should be located approximately 1 meter (3 ft) from the Logger in order to avoid interference from the radio. Use Smart Sensor extension cable Onset part # S‐EXT‐M002.

2 input channels of AC Current and/or Voltage Measures True RMS for accurate readings of sinusoidal and non-sinusoidal waveforms

Environment:
The S-FS-TRMSA-D Sensor is for use in Indoor environments

Measurements:
The S-FS-TRMSA-D Sensor supports the following measurements:

AC Current, AC Voltage