Onset Hobo Data Loggers Authorised Distributor

HOBO TidbiT MX Temperature 5000' Data Logger

The HOBO MX2204 TidbiT water temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device.
Part Number: MX2204
Delivery date: 1-2 weeks
$242.00 ex GST
[$266.20 inc GST]

Overview

The HOBO MX2204 TidbiT water temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device. Designed for durability, this rugged waterproof logger is ideal for long-term deployments in streams, lakes, and oceans. Data collection in the field has never been easier!

Highlighted Features

  • Convenient wireless setup and download via Bluetooth Low Energy (BLE)
  • Large memory stores 98,000 measurements
  • Waterproof to 1500 meters (5000 feet)
  • Waterproof boot protects the logger during deployment
  • LED alarm notifies you when temperature exceeds set threshold
  • Water detection feature conserves battery life
  • Works with Onset’s free HOBOmobile app
  • ±0.2°C (±0.36°F) accuracy

Whats in the box

  • Data Logger
  • Protective Boot

In what environment does this data logger operate?

This data logger operates in indoor, outdoor and underwater environments.

What measurements does this data logger support?

The MX2204 data logger supports the following measurements: Temperature and Water Temp

Important Info

The HOBO MX2204 data logger requires the HOBOmobile App and a compatible mobile device. The system requirements for the HOBOmobile app can be found at the bottom of our HOBOmobile software page.

Overview

The HOBO MX2204 TidbiT water temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device. Designed for durability, this rugged waterproof logger is ideal for long-term deployments in streams, lakes, and oceans. Data collection in the field has never been easier!

Highlighted Features

  • Convenient wireless setup and download via Bluetooth Low Energy (BLE)
  • Large memory stores 98,000 measurements
  • Waterproof to 1500 meters (5000 feet)
  • Waterproof boot protects the logger during deployment
  • LED alarm notifies you when temperature exceeds set threshold
  • Water detection feature conserves battery life
  • Works with Onset’s free HOBOmobile app
  • ±0.2°C (±0.36°F) accuracy

Whats in the box

  • Data Logger
  • Protective Boot

In what environment does this data logger operate?

This data logger operates in indoor, outdoor and underwater environments.

What measurements does this data logger support?

The MX2204 data logger supports the following measurements: Temperature and Water Temp

Important Info

The HOBO MX2204 data logger requires the HOBOmobile App and a compatible mobile device. The system requirements for the HOBOmobile app can be found at the bottom of our HOBOmobile software page.

To see the full specifications for this product, please see our product manual found under the PDF documents above.

Temperature Sensor (MX2203 and MX2204)

Range

MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water

MX2204: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water, maximum sustained temperature in water 30°C (86°F)

Accuracy

±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F)

±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F)

Resolution

0.01°C (0.018°F)

Drift

<0.1°C (0.18°F) per year

Response Time

MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted;

7 minutes typical to 90% in stirred water, unmounted

MX2204: 15 minutes typical to 90% in air moving 1 m/s, unmounted;

4 minutes typical to 90% in stirred water, unmounted

 

Logger

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)

Logger Operating Range

-20° to 70°C (-4° to 158°F)

Logging Rate

1 second to 18 hours

Buoyancy (Fresh Water)

MX2203: 3.1 g (0.11 oz) negative

MX2204: 7.6 g (0.27 oz) negative

Waterproof

MX2203: To 122 m (400 ft)

MX2204: To 1,524 m (5,000 ft)

Water Detection

Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected.

The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F).

Memory

96,000 measurements

Battery

CR2477 3V lithium, user replaceable in MX2303, non-replaceable in MX2304

Battery Life

3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off disabled in software.

5 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off or Bluetooth Off Water Detect enabled in software.

Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.

To ensure proper battery installation, see Battery Information for detailed instructions on replacing the battery in the MX2203 logger.

Time Accuracy

± 1 minute per month at 25°C (77°F)

Full Memory Dowload

Approximately 45 seconds; may take longer the farther the device is from the logger

Wetted Materials

MX2303: Polypropylene case, EPDM O-ring, stainless steel screws, Santoprene® (TPE) boot

MX2304: Epoxy case, Santoprene (TPE) boot

Dimensions

MX2203: 4.45 x 7.32 x 3.58 cm (1.75 x 2.88 x 1.41 inches)

MX2204: 4.06 x 6.99 x 3.51 cm (1.6 x 2.75 x 1.38 inches)

Weight

MX2203: 36.2 g (1.28 oz)

MX2204: 32.8 g (1.16 oz)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Frequently Asked Questions

Can I download data from MX2200 Series loggers deployed in water?
 
No, the MX2200 Series need to be taken out of the water to download the data.

Do I need an optical shuttle to download data from the MX2200?
 
No, you need to have a mobile device such as a phone or tablet that runs iOS or Android operating systems and that have Bluetooth Low Energy (Bluetooth 4.0 or above) in order to download the data.

Is an event recorded in the data file when the logger is submersed or removed from the water?
 
With the MX2203 & MX2204, the user has the option while configuring the loggers to use the Bluetooth Off Water Detect. The logger will not advertise when the presence of water is detected. Once the logger is removed from the water, advertising will automatically turn on, thereby not requiring you to push a button (or use a magnet) to wake up the logger when you need to connect to it. This option preserves some battery power. Note: The logger will check for the presence of water every 15 seconds when this is option is selected.

Do the new MX2200 Series water loggers replace the existing Pendant and TidbiT water loggers?
 
No, we will continue to support the TidbiT, Pendant, and Water Temp Pro optical products although we encourage folks to take a look at the new features of the MX2200 Series.

Can I use HOBOware software to graph, analyze and export the data?
 
You have the ability to share a .HOBO file via email, or use HOBOlink.com to then open up the file in HOBOware to do additional data analysis like combining graphs and analyzing your data further. Note that HOBOmobile can also directly output a .XLSX & .CSV file format if you choose to work in Excel

Onset HOBO MX2200 Series Intro

Online store by DBG Technologies, powered by LiveCube